Indiacon CivilSubscribe

Textbook › Strength of Materials

Strength of Materials: contents

9 chapters and 38 lessons; 0 published so far. Lessons are written in order.

Chapter 1: Simple stress and strain

  1. 1.1 Stress, strain and Hooke's law in preparation
  2. 1.2 Stress-strain behaviour of steel and concrete in preparation
  3. 1.3 Elastic constants and their relations in preparation
  4. 1.4 Bars of varying section and compound bars in preparation
  5. 1.5 Thermal stresses in preparation
  6. 1.6 Strain energy and impact loading in preparation

Chapter 2: Shear force and bending moment

  1. 2.1 Beams, supports and loads in preparation
  2. 2.2 SFD and BMD of cantilevers in preparation
  3. 2.3 SFD and BMD of simply supported and overhanging beams in preparation
  4. 2.4 Load-shear-moment relations in preparation
  5. 2.5 Points of contraflexure in preparation

Chapter 3: Bending stresses

  1. 3.1 Theory of simple bending in preparation
  2. 3.2 Section modulus and beam selection in preparation
  3. 3.3 Composite (flitched) beams in preparation
  4. 3.4 Introduction to unsymmetrical bending in preparation

Chapter 4: Shear stresses in beams

  1. 4.1 Shear stress formula in preparation
  2. 4.2 Shear stress distribution in common sections in preparation
  3. 4.3 Shear flow and shear centre in preparation

Chapter 5: Deflection of beams

  1. 5.1 Differential equation of the elastic curve in preparation
  2. 5.2 Double integration and Macaulay's method in preparation
  3. 5.3 Moment-area method in preparation
  4. 5.4 Conjugate beam method in preparation
  5. 5.5 Strain energy method for deflection in preparation

Chapter 6: Torsion

  1. 6.1 Torsion of circular shafts in preparation
  2. 6.2 Power transmitted by shafts in preparation
  3. 6.3 Combined bending and torsion in preparation
  4. 6.4 Closed-coiled helical springs in preparation

Chapter 7: Transformation of stress and strain

  1. 7.1 Stresses on inclined planes in preparation
  2. 7.2 Principal stresses and maximum shear stress in preparation
  3. 7.3 Mohr's circle of stress in preparation
  4. 7.4 Strain transformation and strain rosettes in preparation
  5. 7.5 Theories of failure in preparation

Chapter 8: Thin and thick cylinders

  1. 8.1 Thin cylinders and spheres in preparation
  2. 8.2 Thick cylinders by Lamé's theory in preparation

Chapter 9: Columns and combined stresses

  1. 9.1 Euler's theory and effective length in preparation
  2. 9.2 Rankine-Gordon formula in preparation
  3. 9.3 Eccentric loading and the secant formula in preparation
  4. 9.4 Direct and bending stresses and the kern of a section in preparation

Related topic pages in the library: Strength of materials