Indiacon Expert Review Circle
Indiacon is an open, free civil engineering library. We invite professors, researchers, practising engineers, subject experts and research students to help make the lessons more complete and more precise.
How it works
- We keep a short list of open technical points, each with a clear working position and the clause or document it already relies on.
- Anyone can send a contribution through the private form on any page, including this one, or by writing to indiacongroupofengineers [at] gmail [dot] com.
- A contribution is considered only when it is backed by evidence: a code clause with edition, a peer-reviewed paper, an official document, test data, or a reproducible calculation.
- Accepted contributions go through our three-check process (recomputation, code-edition and clause check, two independent sources) before any page or video changes.
- Material changes are listed openly on our corrections log.
Credit
With your written consent, we credit accepted contributions by name and affiliation on the page they improved. Contributors are not described as reviewers or advisers unless they formally join a named panel.
What we do not accept
Opinions without a reference, product or brand promotion, or anything off-topic.
Open technical points
These are the points currently open. Each already has a working position on the relevant lesson. We will change a page only when a clause and edition, an official document, or a reproducible calculation requires it.
- Tabulated C0 values in the coefficient method — Our working position is that, in the ASCE/SEI 41 coefficient method, C0 converts a single-degree-of-freedom spectral displacement to the roof displacement of a multi-storey system. C1 and C2 then adjust for inelastic and degrading behaviour. IS 1893 (Part 1) does not tabulate C0, so a 1.2–1.5 factor is not treated on this page as an Indian-code inelastic multiplier. Tabulated storey-by-storey C0 values will be added only from the official standard. Working basis: ASCE/SEI 41 coefficient method, as already described on this page; IS 1893 (Part 1) has no C0 table.
- Official status of IS 15988:2013 — Our working position is that IS 15988:2013 is the edition this site cites for seismic evaluation and strengthening of existing RC buildings. It is listed on the official BIS CED 39 programme of work as reaffirmed in February 2023. Until a second official BIS catalogue or Know Your Standard record is in hand, the site label remains “status not verified,” not a bare “current.” Working basis: BIS CED 39 programme of work (IS 15988:2013, reaffirmed February 2023).
- Official compressive-strength definition of UHPC — Our working position is that ultra-high-performance fibre-reinforced concrete has compressive strength far above ordinary structural grades, and that design must use measured properties of the actual mix. This page does not adopt a single official cut-off (figures such as 100 N/mm² or 120 N/mm² appear in specialised literature). A single definition will be stated only when it is confirmed from two official publishers. Working basis: No official Indian Standard definition adopted on this page.
- fib Model Code 2020 residual-strength formulas — Our working position is that the residual-strength formulas on this page follow fib Model Code 2010 (including the rigid-plastic model fFtu = fR3/3). A later fib Model Code 2020 exists. Those formulas will be cited to MC2020 only after they have been checked against that edition. Working basis: fib Model Code 2010, as already cited on this page.
- How a code response reduction factor R relates to Rμ and overstrength — Our working position is that displacement ductility μ is not the same thing as a code response reduction factor R. The equal-displacement and equal-energy rules give a ductility-related reduction Rμ (Rμ ≈ μ in the long-period range; Rμ ≈ √(2μ − 1) in the short-period range). In the literature a code factor R also includes overstrength and is often written R ≈ Rμ × Ω. That product is not stated here as an IS 1893 formula; the official clause text was not in hand for this check. Working basis: Equal-displacement and equal-energy rules for Rμ, as already worked on the Ductility page. The R ≈ Rμ × Ω decomposition is not adopted as an IS 1893 equation pending the official text.
- Whether IRC:78 (Part 1)-2024 keeps the well tilt (1 in 80) and shift (150 mm) of IRC:78-2014 — The figures are confirmed in the IRC:78-2014 text, cl. 708.5.1: a tilt of 1 in 80 and a shift of 150 mm due to translation, both additive, in the direction causing the most severe effect, are to be considered in design; cl. 708.5.2 covers wells that exceed them. IRC:78 (Part 1)-2024 has replaced the 2014 edition, and we have not yet read its text, so the page cites the 2014 clause and asks readers to confirm the clause in the 2024 edition. Working basis: IRC:78-2014 cl. 708.5.1 and 708.5.2 (code text read 13 Nov 2026); IRC:78 (Part 1)-2024 text not yet read.
- Yield-strength bands by thickness in IS 2062 (Part 1):2025 — The pages now cite IS 2062 (Part 1):2025, which superseded IS 2062:2011. The thickness bands used in the examples (for example E250: 250, 240 and 230 N/mm² below 20 mm, 20–40 mm and above 40 mm) are the 2011 values. We have not read the 2025 table, so the examples say so and ask readers to confirm the band in the current edition. Working basis: IS 2062:2011 text; BIS record of IS 2062 (Part 1):2025 (established 29 Dec 2025; 2011 edition withdrawn after 29 June 2026).
- Current status of IS 801:1975 (cold-formed steel) — IS 801:1975 is a working-stress code. The page cites it and asks readers to check the BIS catalogue for its current status; it does not claim a revision or a withdrawal. Working basis: Title and scope of IS 801:1975; no BIS status record read in this review.
- Amendment status of the 0.70 pz floor in IS 875 (Part 3):2015 — The printed IS 875 (Part 3):2015 cl. 7.2 says the design wind pressure pd shall not be taken as less than 0.70 pz, and the page follows it. We have not seen an official amendment changing this value; if one exists, the page and its example will be updated. Working basis: IS 875 (Part 3):2015 text, cl. 7.2.
Earlier: the design shear for slender RC walls under IS 13920:2016 was settled from cl. 10.2 of that edition (factored Vu; no capacity-based amplification for walls) and is reflected on the Shear walls page.
Found an error, or have evidence on an open point? Use the correction form below, or write to indiacongroupofengineers [at] gmail [dot] com.
Suggest a correction
If something on this page is wrong, tell the editor. Your message is sent privately and is not published.