Indiacon CivilSubscribe

Textbook › Reinforced Concrete Design

Reinforced Concrete Design: contents

8 chapters and 27 lessons; 0 published so far. Lessons are written in order.

Chapter 1: Design philosophies

  1. 1.1 Working stress method in preparation
  2. 1.2 Limit state method and partial safety factors in preparation
  3. 1.3 Characteristic loads and strengths in preparation

Chapter 2: Limit state of collapse: flexure

  1. 2.1 Stress block and assumptions in preparation
  2. 2.2 Singly reinforced rectangular beams in preparation
  3. 2.3 Doubly reinforced beams in preparation
  4. 2.4 Flanged beams in preparation

Chapter 3: Shear, bond and torsion

  1. 3.1 Shear in beams and design of stirrups in preparation
  2. 3.2 Bond and development length in preparation
  3. 3.3 Design for torsion in preparation
  4. 3.4 Detailing rules for beams in preparation

Chapter 4: Limit state of serviceability

  1. 4.1 Deflection control in preparation
  2. 4.2 Crack width control in preparation

Chapter 5: Slabs and stairs

  1. 5.1 One-way slabs in preparation
  2. 5.2 Two-way slabs in preparation
  3. 5.3 Introduction to flat slabs in preparation
  4. 5.4 Staircases in preparation

Chapter 6: Columns

  1. 6.1 Short axially loaded columns in preparation
  2. 6.2 Columns with uniaxial bending in preparation
  3. 6.3 Columns with biaxial bending in preparation
  4. 6.4 Slender columns in preparation

Chapter 7: Footings

  1. 7.1 Isolated footings in preparation
  2. 7.2 Combined footings in preparation
  3. 7.3 Introduction to raft foundations in preparation

Chapter 8: Special structures

  1. 8.1 Cantilever retaining walls in preparation
  2. 8.2 Water tanks in preparation
  3. 8.3 Introduction to ductile detailing in preparation

Related topic pages in the library: Rcc design