Indiacon CivilSubscribe

Textbook › Reinforced Concrete Design

Reinforced Concrete Design: contents

8 chapters and 27 lessons; 27 published so far. Lessons are written in order.

Subject complete: all 27 lessons of Reinforced Concrete Design are now published, from first principles to the last chapter. Each lesson has worked examples recomputed before publication and practice questions with answers.

Chapter 1: Design philosophies

  1. 1.1 Working stress method
  2. 1.2 Limit state method and partial safety factors
  3. 1.3 Characteristic loads and strengths

Chapter 2: Limit state of collapse: flexure

  1. 2.1 Stress block and assumptions
  2. 2.2 Singly reinforced rectangular beams
  3. 2.3 Doubly reinforced beams
  4. 2.4 Flanged beams

Chapter 3: Shear, bond and torsion

  1. 3.1 Shear in beams and design of stirrups
  2. 3.2 Bond and development length
  3. 3.3 Design for torsion
  4. 3.4 Detailing rules for beams

Chapter 4: Limit state of serviceability

  1. 4.1 Deflection control
  2. 4.2 Crack width control

Chapter 5: Slabs and stairs

  1. 5.1 One-way slabs
  2. 5.2 Two-way slabs
  3. 5.3 Introduction to flat slabs
  4. 5.4 Staircases

Chapter 6: Columns

  1. 6.1 Short axially loaded columns
  2. 6.2 Columns with uniaxial bending
  3. 6.3 Columns with biaxial bending
  4. 6.4 Slender columns

Chapter 7: Footings

  1. 7.1 Isolated footings
  2. 7.2 Combined footings
  3. 7.3 Introduction to raft foundations

Chapter 8: Special structures

  1. 8.1 Cantilever retaining walls
  2. 8.2 Water tanks
  3. 8.3 Introduction to ductile detailing

Related topic pages in the library: Rcc design

Suggest a correction

If something on this page is wrong, tell the editor. Your message is sent privately and is not published.

Sent privately to the Indiacon editor; not published.