Indiacon CivilSubscribe

Textbook › Steel Design

Steel Design: contents

8 chapters and 19 lessons; 19 published so far. Lessons are written in order.

Subject complete: all 19 lessons of Steel Design are now published, from first principles to the last chapter. Each lesson has worked examples recomputed before publication and practice questions with answers.

Chapter 1: Materials and design basis

  1. 1.1 Structural steel and rolled sections
  2. 1.2 Limit state design of steel structures
  3. 1.3 Working stress method concepts

Chapter 2: Connections

  1. 2.1 Bolted connections
  2. 2.2 Welded connections
  3. 2.3 Eccentric connections
  4. 2.4 Beam-column connections

Chapter 3: Tension members

  1. 3.1 Yielding, rupture and block shear
  2. 3.2 Lug angles and splices

Chapter 4: Compression members

  1. 4.1 Buckling and column curves
  2. 4.2 Built-up columns with lacing and battens
  3. 4.3 Column bases

Chapter 5: Beams

  1. 5.1 Laterally supported beams
  2. 5.2 Laterally unsupported beams
  3. 5.3 Introduction to plate girders

Chapter 6: Beam-columns

  1. 6.1 Members under combined axial force and bending

Chapter 7: Plastic design

  1. 7.1 Plastic analysis and design of beams and portal frames

Chapter 8: Industrial structures

  1. 8.1 Roof trusses and purlins
  2. 8.2 Gantry girders

Related topic pages in the library: Steel design

Suggest a correction

If something on this page is wrong, tell the editor. Your message is sent privately and is not published.

Sent privately to the Indiacon editor; not published.