2.6 Introduction to space trusses
After this lesson you should be able to:
- State the determinacy condition for space trusses and the support types that give one, two or three reaction components.
- Solve a joint of a space truss with three unknown member forces using unit vectors.
- Explain how towers and space frames gain stability from tetrahedral units.
Theory
A space truss is the three-dimensional version of a plane truss. Its basic stable unit is the tetrahedron: six members joining four joints. Transmission line towers, telecommunication masts, roof space frames over stadiums and halls, and crane booms are space trusses. The ideal assumptions carry over: ball-and-socket joints, loads at joints, and two-force members.
Each joint in space gives three equations, ΣFx = 0, ΣFy = 0 and ΣFz = 0, so with j joints there are 3j equations. The unknowns are m member forces and r reaction components. The space truss may be determinate when m + r = 3j, is indeterminate when m + r > 3j and is a mechanism when m + r < 3j. A stable space truss needs at least six well-placed reaction components; a ball-and-socket support gives three, a roller in a slot two, and a ball on a smooth plane one.
Member forces are found joint by joint, exactly as in the plane, but with unit vectors in three dimensions. The member force from joint i to joint j is F times (xj − xi, yj − yi, zj − zi)/L. A joint with three unknown members gives three linear equations, solved by substitution or matrices.
A special case is worth remembering: for a tripod whose apex lies directly above the centroid of the triangle formed by its feet, a vertical load is shared equally by the three legs in vertical component, whatever their individual lengths. This follows from horizontal equilibrium and is a quick check on many tower and sheer-leg problems.
Derivation
- Each ideal member is a two-force member, so its force acts along it: F e, with e the unit vector along the member.
- At a joint with external load P, equilibrium is Σ F e + P = 0, three scalar equations.
- Over the whole truss, 3j equations must match m + r unknowns: m + r = 3j for determinacy.
- Tripod with apex above the origin at height h and feet at horizontal positions r1, r2, r3: the vertical component of leg i is Vi = Fi h / Li and its horizontal component is Vi ri / h. Horizontal equilibrium gives Σ Vi ri = 0 and vertical equilibrium gives Σ Vi = W.
- If the origin is the centroid of the feet, Σ ri = 0, so Vi = W/3 satisfies both; as the ri are not collinear the solution is unique. Each leg force is then Fi = (W/3) Li / h.
Space truss determinacy: m + r = 3jUnit vector along member: e = (Δx, Δy, Δz) / L, L = √(Δx² + Δy² + Δz²)Joint equilibrium: ΣFx = ΣFy = ΣFz = 0Tripod, apex above centroid of feet, vertical load W: each leg F = (W/3) L / h (compression)
- Ball-and-socket joints and joint loads; two-force members.
- At least six reaction components arranged to prevent all rigid-body motion.
- Small deflections.
Codes and standards
Indian Standards are cited by number and clause only; no clause text, tables or figures are reproduced. Other standards are listed for comparison, not ranked.
- Transmission line towers in India are designed to IS 802 (Part 1/Sec 1):2015 for materials and loads; ASCE 10 and EN 50341-1 serve the same purpose elsewhere. They are listed for comparison, not ranked. The mechanics in this lesson is code-independent.
Worked examples
Problem. A symmetric tripod has its apex 4 m above the ground and each foot 3 m horizontally from the point below the apex, the feet 120° apart in plan. It carries a vertical load of 30 kN. Find the force in each leg.
- Each leg length L = √(3² + 4²) = 5 m.
- By symmetry each leg carries one third of the load in vertical component: 10 kN.
- Leg force F = 10 × 5 / 4 = 12.5 kN.
- The legs push up on the apex, so they are in compression.
Answer. 12.5 kN compression in each leg
Problem. A lifting tripod (sheer legs) has its apex D at (0, 0, 6 m) and feet at A (4, 0, 0), B (0, 3, 0) and C (−4, −3, 0) m. A 12 kN load hangs from D. Find the leg forces.
- Leg lengths: DA = √(16 + 36) = 7.211 m; DB = √(9 + 36) = 6.708 m; DC = √(16 + 9 + 36) = 7.810 m.
- The centroid of the feet is ((4 + 0 − 4)/3, (0 + 3 − 3)/3) = (0, 0), directly below D, so each leg carries 12/3 = 4 kN vertically.
- F_DA = 4 × 7.211 / 6 = 4.807 kN; F_DB = 4 × 6.708 / 6 = 4.472 kN; F_DC = 4 × 7.810 / 6 = 5.207 kN, all compression.
- Check ΣFx at D: horizontal components 4 × 4/6 + 0 − 4 × 4/6 = 0; ΣFy: 0 + 4 × 3/6 − 4 × 3/6 = 0.
Answer. DA 4.807 kN, DB 4.472 kN, DC 5.207 kN, all compression
Step-by-step procedure
- Check m + r = 3j and that the supports prevent all six rigid-body motions.
- Find the reactions if needed from the whole truss (six equations).
- Start at a joint with no more than three unknown members.
- Write unit vectors from coordinates; set up ΣFx, ΣFy, ΣFz = 0 and solve.
- Check with an unused equation or a special case such as the tripod rule.
Site notes
- Lifting tripods must stand on firm, level ground with the apex over the centroid of the feet; if one foot settles, the leg shares change and one leg can be overloaded.
- Tower legs carry most of the overturning moment as axial forces; bracing members keep the legs short between nodes so they do not buckle.
- Space frame roofs are sensitive to missing or loose members at the supports, where forces concentrate; inspect bearing nodes first.
- Using the plane-truss rule 2j for a space truss.
- Getting a sign wrong in one coordinate of a unit vector.
- Supplying fewer than six reaction components, or six that all pass through one line.
- Assuming equal leg forces when legs have different lengths (equal vertical shares, not equal forces).
- Forgetting the third equation, ΣFz = 0.
Tripod check: when the apex is above the centroid of the feet, each leg carries W/3 vertically; longer legs carry larger axial forces in proportion to their length.
Summary
- Space trusses are built of tetrahedra; m + r = 3j for determinacy.
- Each joint gives three equations; use 3D unit vectors.
- Six properly arranged reaction components are needed for stability.
- Tripod rule: equal vertical shares when the apex is above the centroid of the feet.
Practice questions
Tap a question to see the answer.
1A tetrahedron has 4 joints and 6 members. How many reaction components make it determinate?
m + r = 3j: 6 + r = 12, so r = 6.
2A space truss has j = 10, m = 24, r = 6. Classify it.
m + r = 30 = 3j, so determinate if stably supported.
3Find the unit vector of a member from (0, 0, 0) to (2, 3, 6) m.
L = 7 m; e = (2/7, 3/7, 6/7).
4A symmetric tripod has legs 6.5 m long and apex 6 m high, carrying 18 kN. Find each leg force.
Each vertical share 6 kN; F = 6 × 6.5 / 6 = 6.5 kN compression.
5How many reaction components does a ball-and-socket support provide?
Three (one force component in each axis direction).
References
Standard texts, listed in no order of merit. Our explanations, examples and diagrams are original; nothing is copied from these books.
- F. P. Beer, E. R. Johnston, D. F. Mazurek, P. J. Cornwell, B. P. Self, Vector Mechanics for Engineers: Statics and Dynamics, McGraw Hill, 12th edition, 2019.
- R. C. Hibbeler, Engineering Mechanics: Statics, Pearson, 15th edition, 2022 (published 2021).
- J. L. Meriam, L. G. Kraige, J. N. Bolton, Engineering Mechanics: Statics, Wiley, 9th edition, 2018.
- S. Timoshenko, D. H. Young, J. V. Rao, S. Pati, Engineering Mechanics (in SI units), McGraw Hill Education (India), 5th edition, 2013.