5.5 Mass moment of inertia
After this lesson you should be able to:
- Define the mass moment of inertia of a body about an axis and its radius of gyration.
- Derive standard results for a slender rod, a thin ring, a disc or solid cylinder and a thin plate, and state the result for a sphere.
- Apply the parallel axis theorem for mass and use mass moments in rotation problems such as lifting and rollers.
Theory
In dynamics, the resistance of a body to angular acceleration about an axis is its mass moment of inertia, I = ∫ r² dm, where r is the perpendicular distance of each mass element from the axis. It plays the role in rotation that mass plays in translation: the moment about a fixed axis equals I times the angular acceleration, M = I α. Its unit is kg·m².
The definition looks like the second moment of area, with mass in place of area. For a thin flat plate of uniform thickness t and density ρ, dm = ρ t dA, so the mass moment about an axis in the plate is ρ t times the area second moment. For solid bodies the integral is over the volume, dm = ρ dV.
The parallel axis theorem holds in the same form: I = I_G + m d², where I_G is about a parallel axis through the centre of mass G. The radius of gyration k is defined by I = m k². For thin plates only, the perpendicular axis theorem also holds: the moment about an axis normal to the plate equals the sum of the moments about two perpendicular axes in the plate through the same point.
Civil engineers meet mass moments when lifting and tilting long members, in the rotation of rollers, drums and winches, in the rocking of tall blocks and towers, and in the rotational inertia of floors used in dynamic and earthquake analysis.
Derivation
- Slender rod of mass m and length L about a perpendicular axis through one end: dm = (m/L) dx, so I_end = ∫₀ᴸ x² (m/L) dx = m L²/3.
- About the centre: integrate from −L/2 to L/2, giving I_G = m L²/12. Check with the parallel axis theorem: m L²/12 + m (L/2)² = m L²/3.
- Thin ring of radius r about its axis: every element is at r, so I = m r².
- Disc or solid cylinder of radius r about its axis: rings of radius ρ with dm = (m/(π r²)) 2π ρ dρ give I = ∫₀ʳ ρ² dm = m r²/2.
- Thin rectangular plate a × b about the centroidal axis normal to it: by the perpendicular axis theorem I = m b²/12 + m a²/12 = m (a² + b²)/12.
- Solid sphere of radius r about a diameter: summing discs gives I = 2 m r²/5 (standard result).
I = ∫ r² dm (kg·m²); I = m k²Parallel axis: I = I_G + m d²Slender rod: I_G = m L²/12, I_end = m L²/3Thin ring: m r²; disc or solid cylinder: m r²/2; solid sphere: 2 m r²/5Thin plate a × b (normal axis through centre): m (a² + b²)/12Rotation about a fixed axis: M = I α
- The body is rigid and of uniform density unless stated.
- A slender rod has a cross-section small compared with its length; for a prism of side b the exact centroidal value adds m b²/12, which is negligible for long members.
- The perpendicular axis theorem for mass applies only to thin flat plates.
Codes and standards
Indian Standards are cited by number and clause only; no clause text, tables or figures are reproduced. Other standards are listed for comparison, not ranked.
- No design code governs this lesson. Self-weights used to find masses come from unit weights such as those in IS 875 (Part 1):1987 (see lesson 4.5).
Worked examples
Problem. A precast concrete pile 300 mm × 300 mm × 12 m long is tilted up by pivoting about one end. Taking a density of 2 500 kg/m³, find its mass, its mass moment of inertia about the pivot end and about its centre, and its radius of gyration about the end.
- Volume = 0.3 × 0.3 × 12 = 1.08 m³; m = 1.08 × 2 500 = 2 700 kg.
- Treat as a slender rod: I_end = m L²/3 = 2 700 × 12²/3 = 129 600 kg·m².
- I_G = m L²/12 = 32 400 kg·m²; check: 32 400 + 2 700 × 6² = 129 600.
- k_end = L/√3 = 6.928 m. The cross-section correction m b²/12 = 20.25 kg·m² is negligible.
Answer. m = 2 700 kg; I_end = 129 600 kg·m²; I_G = 32 400 kg·m²; k = 6.928 m
Problem. A road roller drum is a solid steel cylinder of mass 3 000 kg and radius 0.6 m (treated as solid for this estimate). Find its mass moment of inertia about its axle, its radius of gyration, and the angular acceleration produced by a net torque of 270 N·m.
- I = m r²/2 = 3 000 × 0.6²/2 = 540 kg·m².
- k = r/√2 = 0.4243 m.
- α = M/I = 270/540 = 0.5 rad/s².
Answer. I = 540 kg·m²; k = 0.4243 m; α = 0.5 rad/s²
Step-by-step procedure
- Identify the axis and find the mass from volume and density.
- Pick the matching standard result or set up ∫ r² dm.
- Use the parallel axis theorem for axes not through G.
- For composite bodies add the parts (subtract holes) about the same axis.
- Use M = I α or energy methods for the motion.
Site notes
- When a long member is tilted about one end, its rotational inertia about that end is four times the value about its centre, so the crane and the restraints must control the swing as it nears vertical.
- Drum rollers and winch drums store rotational energy; braking them needs torque proportional to I.
- Do not confuse kg·m² (mass moment) with mm⁴ (area moment); they answer different questions.
- Using area second moments (mm⁴) in M = I α.
- Using m L²/12 when the axis is at the end.
- Applying the plate perpendicular axis theorem to a thick solid body.
- Using weight in newtons instead of mass in kilograms.
- Using the disc formula for a hollow drum, where the value lies between m r²/2 and m r².
A body's mass moment of inertia about any axis is smallest about the parallel axis through its centre of mass, and k always lies between zero and the largest distance of any mass from the axis.
Summary
- I = ∫ r² dm, units kg·m²; I = m k².
- Rod m L²/12 (centre), m L²/3 (end); ring m r²; disc m r²/2; sphere 2 m r²/5.
- I = I_G + m d²; perpendicular axis theorem for thin plates only.
- Used in M = I α for lifting, rollers and dynamics.
Practice questions
Tap a question to see the answer.
1Find I of a 10 kg solid sphere of radius 0.1 m about a diameter.
I = 2 × 10 × 0.1²/5 = 0.04 kg·m².
2A 50 kg disc of radius 0.2 m rotates about an axis parallel to its own axis and 0.5 m from it. Find I.
I = 50 × 0.2²/2 + 50 × 0.5² = 1 + 12.5 = 13.5 kg·m².
3Find I of a 20 kg thin ring of radius 0.5 m about its axis.
I = 20 × 0.5² = 5 kg·m².
4Find I of a 6 m, 120 kg slender beam about a perpendicular axis through its centre, and about one end.
Centre 120 × 36/12 = 360 kg·m²; end 120 × 36/3 = 1 440 kg·m².
5Find I of a thin 2 m × 1 m plate of mass 80 kg about the axis normal to it through its centre.
I = 80 (2² + 1²)/12 = 33.33 kg·m².
References
Standard texts, listed in no order of merit. Our explanations, examples and diagrams are original; nothing is copied from these books.
- F. P. Beer, E. R. Johnston, D. F. Mazurek, P. J. Cornwell, B. P. Self, Vector Mechanics for Engineers: Statics and Dynamics, McGraw Hill, 12th edition, 2019.
- R. C. Hibbeler, Engineering Mechanics: Statics, Pearson, 15th edition, 2022 (published 2021).
- J. L. Meriam, L. G. Kraige, J. N. Bolton, Engineering Mechanics: Statics, Wiley, 9th edition, 2018.
- S. Timoshenko, D. H. Young, J. V. Rao, S. Pati, Engineering Mechanics (in SI units), McGraw Hill Education (India), 5th edition, 2013.