5.2 Parallel and perpendicular axis theorems
After this lesson you should be able to:
- State and prove the parallel axis theorem for second moments of area.
- State the perpendicular axis theorem and use it to find polar moments.
- Transfer second moments between parallel axes correctly, always through the centroidal axis.
Theory
Tables give second moments of simple shapes about their own centroidal axes, but sections are usually built from several shapes whose centroids are not on the axis of interest. The parallel axis theorem moves a second moment from the centroidal axis of an area to any parallel axis: I = I_c + A d², where d is the perpendicular distance between the two axes.
The extra term A d² is always positive, so the second moment about any axis is least about the parallel axis through the centroid. This is why the theorem only works in one direction from the centroid: to move between two axes that are both off the centroid, first come back to the centroidal axis and then go out to the new one.
The perpendicular axis theorem applies to plane areas. For axes x and y in the plane of the area and z normal to it through their intersection O, the polar moment J_O = I_x + I_y. It gives the polar moment of a circle from its diametral value, and the polar moment of any section about its centroid.
Both theorems also hold for mass moments of inertia (lesson 5.5), with mass m in place of area A, except that the plane-area perpendicular axis theorem applies only to thin flat plates.
Derivation
- Let the x′ axis pass through the centroid C and let the x axis be parallel to it at distance d. For an element dA at distance y′ from x′, its distance from x is y = y′ + d.
- I_x = ∫ (y′ + d)² dA = ∫ y′² dA + 2 d ∫ y′ dA + d² ∫ dA.
- The first integral is I_c. The second is zero because y′ is measured from the centroidal axis, so the first moment ∫ y′ dA = 0. The third is A d².
- Hence I_x = I_c + A d². Check: a rectangle about its base gives b h³/12 + b h (h/2)² = b h³/3, the integral result of lesson 5.1.
- Perpendicular axis theorem: r² = x² + y² for every element, so J_O = ∫ r² dA = ∫ x² dA + ∫ y² dA = I_y + I_x.
Parallel axis: I = I_c + A d² (mm⁴; A in mm², d in mm)Between two non-centroidal axes at d₁ and d₂ from C: I₂ = I₁ − A d₁² + A d₂²Perpendicular axis (plane area): J_O = I_x + I_yRadius of gyration transfer: k² = k_c² + d²
- The two axes in the parallel axis theorem are parallel and one of them passes through the centroid of the area.
- d is the perpendicular distance between the axes.
- The perpendicular axis theorem needs both in-plane axes to meet at the point about which J is taken, with the area lying in that plane.
Codes and standards
Indian Standards are cited by number and clause only; no clause text, tables or figures are reproduced. Other standards are listed for comparison, not ranked.
- No design code governs this lesson; it is geometry used in all section-property calculations, for example for built-up steel members designed to IS 800:2007.
Worked examples
Problem. Find the second moment of area of a 400 mm diameter circle about a tangent, and its polar moment about its centre.
- I_c = π d⁴ / 64 = π × 400⁴ / 64 = 1.2566 × 10⁹ mm⁴.
- A = π × 400² / 4 = 125 664 mm², d = 200 mm, so A d² = 5.0265 × 10⁹ mm⁴.
- I_tangent = 1.2566 × 10⁹ + 5.0265 × 10⁹ = 6.283 × 10⁹ mm⁴, which equals 5π d⁴/64.
- J_O = 2 I_c = π d⁴/32 = 2.513 × 10⁹ mm⁴.
Answer. I_tangent = 6.283 × 10⁹ mm⁴; J_O = 2.513 × 10⁹ mm⁴
Problem. A triangle has a base of 300 mm and a height of 450 mm. Starting from its centroidal value, find its second moment about the base and about an axis through the apex parallel to the base.
- I_c = b h³ / 36 = 300 × 450³ / 36 = 7.594 × 10⁸ mm⁴.
- A = 67 500 mm². The centroid is h/3 = 150 mm above the base, so I_base = 7.594 × 10⁸ + 67 500 × 150² = 2.278 × 10⁹ mm⁴ (= b h³/12).
- The apex is 2h/3 = 300 mm from the centroid, so I_apex = 7.594 × 10⁸ + 67 500 × 300² = 6.834 × 10⁹ mm⁴ (= b h³/4).
- Going directly from the base to the apex with A × 450² would be wrong; the transfer must pass through the centroid.
Answer. I_base = 2.278 × 10⁹ mm⁴; I_apex = 6.834 × 10⁹ mm⁴
Step-by-step procedure
- Find the centroid of the area and its centroidal second moment I_c.
- Measure the perpendicular distance d from the centroidal axis to the required axis.
- Add A d² to I_c.
- For an axis that is not parallel, or for a polar moment, use the perpendicular axis theorem or the rotation formulas of lesson 5.4.
Site notes
- Steel section tables list I about the centroidal axes only; when two sections are joined into a built-up column, each is transferred to the common centroid with A d².
- The A d² term dominates for flanges far from the neutral axis, which is why I-sections are efficient.
- For a rectangular column section the polar moment J = I_x + I_y is not the torsion constant; torsion of non-circular sections needs a separate constant.
- Transferring directly between two axes that are both away from the centroid.
- Subtracting A d² when moving away from the centroid (it is always added when moving away).
- Using the distance to the edge instead of to the centroid.
- Using J = I_x + I_y as the torsion constant of a rectangle.
The smallest second moment among a family of parallel axes is always the one through the centroid; if a transferred value comes out smaller, the direction of transfer is wrong.
Summary
- I = I_c + A d², with one axis through the centroid.
- Always route transfers through the centroid.
- J_O = I_x + I_y for plane areas.
- The same theorems hold for mass moments with m in place of A.
Practice questions
Tap a question to see the answer.
1Using the parallel axis theorem, find I of a 300 × 600 mm rectangle about its 300 mm base.
5.400 × 10⁹ + 180 000 × 300² = 2.160 × 10¹⁰ mm⁴.
2Find the polar moment of a 230 mm wide × 450 mm deep rectangle about its centroid.
J = 230 × 450³/12 + 450 × 230³/12 = 2.203 × 10⁹ mm⁴.
3A section has I = 8.0 × 10⁸ mm⁴ about an axis 100 mm from its centroid and A = 20 000 mm². Find I_c.
I_c = 8.0 × 10⁸ − 20 000 × 100² = 6.0 × 10⁸ mm⁴.
4For the section in the previous question, find I about a parallel axis on the other side of the centroid, 50 mm from it.
6.0 × 10⁸ + 20 000 × 50² = 6.5 × 10⁸ mm⁴.
5Show that k² = k_c² + d².
Divide I = I_c + A d² by A: I/A = I_c/A + d².
References
Standard texts, listed in no order of merit. Our explanations, examples and diagrams are original; nothing is copied from these books.
- F. P. Beer, E. R. Johnston, D. F. Mazurek, P. J. Cornwell, B. P. Self, Vector Mechanics for Engineers: Statics and Dynamics, McGraw Hill, 12th edition, 2019.
- R. C. Hibbeler, Engineering Mechanics: Statics, Pearson, 15th edition, 2022 (published 2021).
- J. L. Meriam, L. G. Kraige, J. N. Bolton, Engineering Mechanics: Statics, Wiley, 9th edition, 2018.
- S. Timoshenko, D. H. Young, J. V. Rao, S. Pati, Engineering Mechanics (in SI units), McGraw Hill Education (India), 5th edition, 2013.