2.3 Buoyancy and stability of floating bodies
After this lesson you should be able to:
- State Archimedes’ principle, write F_B = ρ g V_displaced, and locate the centre of buoyancy as the centroid of the displaced volume.
- Apply vertical equilibrium to a floating body (weight equals the buoyant force) and compute the draft of a uniform rectangular block or pontoon.
- Define the metacentre for a small heel, write BM = I / V and GM = BM − BG when G is above B, and use the sign of GM to decide stability of a floating body.
- Contrast that result with a fully submerged body, which is stable in tilt only when G is below B, using the civil conventions ρ = 1000 kg/m³ and g = 9.81 m/s².
Theory
A body in a liquid is pushed up by the surrounding pressure. The resultant of that pressure, taken over the wetted surface, is the buoyant force, and it is equal to the weight of the liquid that the body displaces. That is Archimedes’ principle, and it is not a separate law: it is the vertical resultant of the hydrostatic force of Lesson 2.2, applied to a closed surface. The force acts upward through the centre of buoyancy B, which is the centroid of the displaced volume. The body’s own weight W = m g acts downward through the centre of gravity G. This lesson is about the balance of those two forces, and about whether a small tilt will right the body or capsize it. The hydrostatic force on a wall or a gate was Lesson 2.2.
For a fully immersed body the displaced volume is the volume of the body itself, so F_B = ρ g V_body. If F_B is greater than W the body rises; if it is smaller, the body sinks; if the two are equal, it is neutrally buoyant and will remain at whatever depth it is placed, ignoring any change of density with depth. For a floating body only part of the volume is immersed, and vertical equilibrium requires W = ρ g V_submerged. That statement fixes the draft once the weight, the liquid density and the waterplane shape are known. With the civil convention ρ = 1000 kg/m³ and g = 9.81 m/s², a body of specific gravity s (s = ρ_body / 1000 kg/m³) that floats in water immerses a fraction s of its volume. A uniform rectangular block of height H therefore floats at a draft s H, provided s is less than 1 and the sides stay vertical.
Stability is a different question from whether the body floats. A fully submerged body (a diving bell, a tethered tunnel element before it is ballasted, a balloon in air) is stable against a small tilt only if G lies below B: the two forces then form a righting couple. If G is above B, they form an overturning couple and the body is unstable in tilt. A floating body can be stable even when G is above B, because a heel changes the shape of the displaced volume and moves B to the side. For a small angle of heel θ, the buoyant-force line through the new centre of buoyancy B′ intersects the original vertical through B at a point M, the metacentre. If M lies above G, the couple of W and F_B is a righting couple; if M lies below G, the couple is overturning. The metacentric height is GM, positive when M is above G. The righting moment is then, for a small heel, W × GM × sin θ (or W × GM × θ with θ in radians). The distance BM is I / V, where V is the displaced volume and I is the second moment of the waterplane area about the longitudinal axis through its centroid — the axis about which the body is heeling. When G is above B, GM = BM − BG. When G is below B, the distances add, GM = BM + BG, and the body is the more stable. I for a rectangular waterplane of length L and beam b, heeling about the long axis, is L b³ / 12. These statements are for a small heel, a rigid body, and a liquid of constant density, with no free liquid surface inside the body. A partly filled tank has a free surface that moves with the heel and reduces the effective GM; that reduction is named here so that it is not forgotten on a pontoon with open ballast tanks, and it is not computed in this lesson.
The civil conventions of Lessons 1.1–2.2 are used in the examples: ρ = 1000 kg/m³ and g = 9.81 m/s², unless a problem states another value. Atmospheric pressure acts all around a floating body and cancels from the net vertical force in the same way as in Lesson 2.2. The formulae do not include wave slam, mooring forces, or the structural design of the pontoon, which are added separately.
Derivation
- The net vertical hydrostatic force on a closed surface equals the weight of the fluid that used to occupy the enclosed volume: F_B = ρ g V_displaced, upward through the centroid of that volume. This is the vertical resultant of Lesson 2.2, or equivalently Archimedes’ principle.
- Floating equilibrium: W = ρ g V_submerged. For a homogeneous body of specific gravity s in water of conventional density 1000 kg/m³, V_submerged = s V, and for a vertical-sided prism of plan area A and height H the draft is t = s H = W / (ρ g A).
- Small heel θ of a floating body: the emerged and immersed wedges transfer a first moment of volume, which shifts B through a distance (I θ) / V in the horizontal direction (θ in radians). The line of action of F_B then intersects the original vertical at a height BM = I / V above B. Then GM = BM − BG when G is above B, and GM = BM + BG when G is below B. The couple is a righting couple if GM is positive.
- For a rectangular waterplane, heeling about an axis along the length L, I = L b³ / 12, so BM = L b³ / (12 V). For a uniform rectangular pontoon of draft t, V = L b t and B lies at mid-draft, so the height of B above the keel is t/2.
- A fully submerged body has no waterplane wedge to shift B, so B is fixed in the body. Stability in tilt then requires G to lie below B.
Archimedes: F_B = ρ g V_displaced (N), upward through B, the centroid of the displaced volumeFloating equilibrium: W = ρ g V_submergedHomogeneous body in water, civil ρ_w = 1000 kg/m³: V_submerged = s V, with s = ρ_body / ρ_w; vertical-sided prism of height H: draft t = s HMetacentric radius: BM = I / V, I = second moment of the waterplane about the heel axis (m⁴), V = displaced volume (m³)Rectangular waterplane, heel about the long axis: I = L b³ / 12Metacentric height, G above B: GM = BM − BG. G below B: GM = BM + BG. Stable for a small heel if GM > 0Small-heel righting moment: W × GM × sin θCivil working values in the examples: ρ = 1000 kg/m³, g = 9.81 m/s²
- The liquid is static and of constant density. The civil conventions ρ = 1000 kg/m³ and g = 9.81 m/s² are those of Lessons 1.1–2.2, unless a problem states other values.
- The draft formula t = s H is for a homogeneous, vertical-sided prism floating with its sides vertical. A list, a trim, or a tapered hull needs the actual submerged volume.
- BM = I / V and the righting moment W × GM × sin θ are for a small heel, a rigid body, and a waterplane that does not change shape so much that I must be recomputed. Large-angle stability uses the righting lever GZ and is not computed here.
- I is about the waterplane axis of heel through the centroid. A second moment about a different axis is not this I.
- A free liquid surface inside the body (ballast tanks, a hold partly full) reduces the effective GM. That effect is named, not calculated, in this lesson.
- A fully submerged body has no waterplane in this sense; its tilt stability is decided only by whether G is below B.
- This lesson does not size a pontoon, does not apply a code partial factor, and does not copy a textbook figure.
Codes and standards
Indian Standards are cited by number and clause only; no clause text, tables or figures are reproduced. Other standards are listed for comparison, not ranked.
- The buoyancy and metacentric formulae are continuum mechanics, not an Indian Standard clause. The civil density and gravity conventions are those already used in Lessons 1.1–2.2. The official standard atmosphere (ISO 2533 p0 = 101 325 Pa) cancels from the net vertical force on a body surrounded by the atmosphere, and is not needed for the examples.
- BIPM SI Brochure (9th edition, 2019) — SI units (newton, metre, kilogram).
- Background textbooks, not ranked: F. M. White, Fluid Mechanics; B. R. Munson, D. F. Young, T. H. Okiishi, W. W. Huebsch, Fundamentals of Fluid Mechanics.
Worked examples
Problem. A homogeneous wooden block is 0.30 m by 0.30 m in plan and 0.20 m high. Its specific gravity is 0.70, relative to the civil water density 1000 kg/m³. The block floats in water with its sides vertical. Taking g = 9.81 m/s², find the weight, the buoyant force, the draft and the freeboard.
- Volume of the block V = 0.30 × 0.30 × 0.20 = 0.0180 m³.
- Weight W = s ρ g V = 0.70 × 1000 × 9.81 × 0.0180 = 123.606 N. For a floating body the buoyant force equals the weight, so F_B = 123.606 N, acting upward through the centroid of the submerged volume.
- Submerged volume V_sub = s V = 0.70 × 0.0180 = 0.0126 m³, or equivalently V_sub = W / (ρ g) = 123.606 / (1000 × 9.81) = 0.0126 m³.
- Draft t = V_sub / (0.30 × 0.30) = 0.0126 / 0.090 = 0.140 m. Freeboard = 0.20 − 0.140 = 0.060 m.
- Check: for a vertical-sided homogeneous prism, t = s H = 0.70 × 0.20 = 0.140 m, the same result.
Answer. W = F_B = 123.606 N; draft = 0.140 m; freeboard = 0.060 m.
Problem. A rectangular pontoon is 8.00 m long and 3.00 m in beam, and it floats at a draft of 1.20 m in water. The centre of gravity is 0.90 m above the bottom (keel). The sides may be treated as vertical, so the centre of buoyancy is at mid-draft. Taking ρ = 1000 kg/m³ and g = 9.81 m/s², find the displaced volume, the buoyant force, BM, BG and GM for a small heel about the long axis, and say whether the pontoon is stable for that small heel.
- Displaced volume V = 8.00 × 3.00 × 1.20 = 28.80 m³. Buoyant force F_B = ρ g V = 1000 × 9.81 × 28.80 = 282 528 N = 282.528 kN, equal to the weight of the floating pontoon.
- Waterplane second moment about the long axis: I = L b³ / 12 = 8.00 × (3.00)³ / 12 = 8.00 × 27.00 / 12 = 18.00 m⁴.
- Metacentric radius BM = I / V = 18.00 / 28.80 = 0.625 m.
- Height of B above the keel, for a uniform rectangle, is t/2 = 0.60 m. Height of G above the keel is 0.90 m, so G is above B and BG = 0.90 − 0.60 = 0.30 m.
- Metacentric height GM = BM − BG = 0.625 − 0.30 = 0.325 m, which is positive, so M is 0.325 m above G and the pontoon is stable for a small heel about the long axis. (A heel about the short axis would use I = b L³ / 12, which is larger, and is not asked here.)
Answer. V = 28.80 m³, F_B = 282.528 kN, BM = 0.625 m, BG = 0.30 m, GM = 0.325 m (stable for a small heel about the long axis).
Step-by-step procedure
- State the liquid density and g. Use ρ = 1000 kg/m³ and g = 9.81 m/s² unless the problem states other values.
- Decide whether the body is fully submerged or floating. If it is floating, write W = ρ g V_submerged and find the draft from the submerged volume and the waterplane area. If it is fully submerged, compare W with ρ g V_body to see whether it rises, sinks, or is neutrally buoyant.
- Locate B as the centroid of the displaced volume (mid-draft for a uniform vertical-sided pontoon) and G as given, or as the centroid of the body if it is homogeneous.
- For a floating-body stability check, compute I of the waterplane about the heel axis, then BM = I / V, then GM = BM − BG (G above B) or BM + BG (G below B). The body is stable for a small heel if GM is positive.
- For a fully submerged body, skip the waterplane step: the body is stable in tilt only if G is below B.
- If a righting moment at a stated small heel is required, use W × GM × sin θ. Do not use that formula at a large angle.
- If the body contains a partly filled tank, note that the free surface will reduce the effective GM, and do not claim the clean-tank GM as the in-service value without that check.
Site notes
- A work pontoon with a crane or a stack of materials on deck can move G up by enough to wipe out a small GM. Recheck GM after the load is placed, not only for the empty hull.
- Open ballast tanks and a partly pumped hold are free surfaces. They make the pontoon less stable than the clean-tank calculation of this lesson.
- Launching a tunnel element or a caisson: while it is fully submerged and being ballasted, G must stay below B, or the element will roll. The floating-body GM formula does not apply in that condition.
- A rectangular pontoon is less stiff against heel about the long axis than about the short axis, because I goes with the cube of the beam. The long-axis GM is the one that usually governs.
- Buoyancy of an empty cofferdam or a sealed pile casing is a real uplift on the supports. Compute F_B from the displaced volume and do not ignore it in the temporary-works check.
- Density of river or sea water is not exactly 1000 kg/m³. If a problem states 1025 kg/m³ for seawater, use that value; do not mix it with the 1000 kg/m³ convention in the same sum.
- Writing F_B = ρ g V_body for a floating body, as if the whole volume were immersed, or writing W = ρ g V_body for a body that is only partly immersed.
- Taking B at G, or taking B at mid-height of the hull rather than mid-draft of the submerged part.
- Computing I about a vertical axis, or using L³ b / 12 when the heel is about the long axis (that would be the short-axis I).
- Subtracting BG from BM when G is below B, or reporting a negative GM as if the body were still stable.
- Using W × GM × sin θ at a large angle of heel, or treating GM as a large-angle righting lever.
- Applying the floating-body metacentre to a fully submerged body, or the submerged G-below-B rule to a floating pontoon with G above B (which can still be stable).
- Mixing ρ = 1000 kg/m³ with γ = 10 kN/m³ in the same arithmetic, or using s as if it were already a draft in metres.
F_B = ρg V_displaced, upward through B. Floating: W = ρg V_sub. BM = I/V, with I = L b³/12 for a rectangular waterplane heeling about the long axis. GM = BM − BG if G is above B; stable for a small heel if GM > 0. A fully submerged body is stable in tilt only if G is below B. Civil water: ρ = 1000 kg/m³, g = 9.81 m/s².
Summary
- The buoyant force on a body is F_B = ρ g V_displaced, acting upward through the centroid of the displaced volume. This is Archimedes’ principle, and it is the vertical resultant of hydrostatic pressure.
- A floating body sits at the draft that makes W = ρ g V_submerged. A homogeneous vertical-sided prism of specific gravity s in water of density 1000 kg/m³ has draft t = s H.
- For a small heel, BM = I / V and GM = BM − BG when G is above B. The floating body is stable if M is above G. The small-heel righting moment is W × GM × sin θ.
- A fully submerged body has a fixed B and is stable in tilt only when G is below B.
- The civil working values in the examples are ρ = 1000 kg/m³ and g = 9.81 m/s². A free liquid surface inside the body reduces GM and is not included in the worked numbers.
Practice questions
Tap a question to see the answer.
1A 1.00 m cube of concrete, specific gravity 2.40, is fully immersed in water. With ρ = 1000 kg/m³ and g = 9.81 m/s², find F_B, the weight, and the net vertical force.
F_B = 1000 × 9.81 × 1.00 = 9 810 N. W = 2.40 × 9 810 = 23 544 N. The net force is 13 734 N downward, so the cube sinks unless it is supported.
2A homogeneous vertical-sided block of height 0.50 m and specific gravity 0.80 floats in water with its sides vertical. What is the draft?
t = s H = 0.80 × 0.50 = 0.40 m.
3A rectangular pontoon 8.00 m long and 3.00 m in beam floats at a 1.20 m draft, as in Example 2. If G is 1.20 m above the keel, what is GM for a small heel about the long axis, and is the pontoon stable?
BM is still 0.625 m and B is still 0.60 m above the keel, so BG = 1.20 − 0.60 = 0.60 m and GM = 0.625 − 0.60 = 0.025 m, which is positive, so the pontoon is just stable for that small heel.
4Why can a floating body be stable when G is above B, while a fully submerged body cannot?
A heel of a floating body changes the shape of the displaced volume and moves B to the side, which can place the metacentre above G. A fully submerged body has no waterplane wedge, so B does not move in the body and the couple is righting only if G is below B.
5A rectangular waterplane is 6.00 m long and 2.00 m in beam. What is I about the long axis?
I = 6.00 × (2.00)³ / 12 = 6.00 × 8.00 / 12 = 4.00 m⁴.
6For that waterplane, if the displaced volume is 10.00 m³, what is BM?
BM = I / V = 4.00 / 10.00 = 0.40 m.
References
Standard texts, listed in no order of merit. Our explanations, examples and diagrams are original; nothing is copied from these books.
- F. M. White, Fluid Mechanics, McGraw Hill, 8th edition, 2016.
- B. R. Munson, D. F. Young, T. H. Okiishi, W. W. Huebsch, Fundamentals of Fluid Mechanics, Wiley, 8th edition, 2016.
- BIPM, The International System of Units (SI Brochure), 9th edition, 2019. The buoyancy and metacentric formulae are continuum mechanics, as used in the lesson.