7.2 Curvilinear motion in rectangular components
After this lesson you should be able to:
- Describe the curvilinear motion of a particle by its position vector r = x i + y j (+ z k).
- Find velocity and acceleration vectors by differentiating each rectangular component, and their magnitudes and directions.
- Recognise that the velocity is always tangent to the path, while the acceleration in general is not.
Theory
When a particle moves along a curve, one coordinate is no longer enough. The position is given by the position vector r drawn from a fixed origin to the particle. In rectangular (Cartesian) components, r = x i + y j + z k, where i, j and k are fixed unit vectors along the axes. Because these unit vectors do not change direction, differentiating r is simply a matter of differentiating each component.
The velocity is v = dr/dt = ẋ i + ẏ j + ż k, where a dot means a time derivative. Its magnitude, the speed, is √(ẋ² + ẏ² + ż²), and its direction is always tangent to the path, since over a very short time the displacement dr lies along the path. The acceleration is a = dv/dt = ẍ i + ÿ j + z̈ k. Unlike the velocity, the acceleration is generally not tangent to the path: it points towards the inside of the curve whenever the direction of motion is changing.
The great advantage of rectangular components is that motion in each direction can be handled separately, as rectilinear motion. A tower-crane hook moving with the trolley and the hoist at the same time, a survey drone climbing while it flies forward, and a projectile (lesson 7.4) are all treated this way: each component obeys its own one-dimensional equations, and the results are combined by vector addition.
If the path is given as an equation y = f(x) and one component of motion is known, the other follows from the chain rule: ẏ = f′(x) ẋ and ÿ = f″(x) ẋ² + f′(x) ẍ. This lets us find the velocity and acceleration of a particle guided along a known curve, such as a slider in a curved slot or a vehicle following a road alignment.
Derivation
- Position: r(t) = x(t) i + y(t) j + z(t) k, with i, j, k fixed in direction.
- Velocity: v = lim Δr/Δt = dr/dt. Since di/dt = dj/dt = dk/dt = 0, v = ẋ i + ẏ j + ż k.
- As Δt → 0, the chord Δr approaches the tangent to the path, so v is tangent to the path.
- Acceleration: a = dv/dt = ẍ i + ÿ j + z̈ k.
- Path y = f(x): ẏ = (dy/dx)(dx/dt) = f′ ẋ; differentiating again with the product rule gives ÿ = f″ ẋ² + f′ ẍ.
r = x i + y j + z k (m)v = ẋ i + ẏ j + ż k; speed v = √(ẋ² + ẏ² + ż²) (m/s)a = ẍ i + ÿ j + z̈ k; |a| = √(ẍ² + ÿ² + z̈²) (m/s²)Direction of v in the plane: tan β = ẏ / ẋPath y = f(x): ẏ = f′ ẋ, ÿ = f″ ẋ² + f′ ẍ
- The axes are fixed (not rotating or accelerating); motion relative to moving axes is lesson 7.5.
- The body is treated as a particle.
- The component functions x(t), y(t), z(t) are smooth enough to differentiate twice.
Codes and standards
Indian Standards are cited by number and clause only; no clause text, tables or figures are reproduced. Other standards are listed for comparison, not ranked.
- No design code governs this lesson; it is a principle of mechanics.
Worked examples
Problem. A particle moves in the x-y plane with x = 2t² and y = t³, where x and y are in metres and t in seconds. Find its velocity and acceleration at t = 2 s, with magnitudes and the direction of the velocity.
- ẋ = 4t, ẏ = 3t²; at t = 2 s: v = 8 i + 12 j m/s.
- Speed = √(8² + 12²) = 14.42 m/s, at tan⁻¹(12/8) = 56.31° above the x-axis.
- ẍ = 4, ÿ = 6t; at t = 2 s: a = 4 i + 12 j m/s².
- |a| = √(4² + 12²) = 12.65 m/s², at tan⁻¹(12/4) = 71.57°: not along the velocity, so the path is curving.
Answer. v = 8i + 12j m/s (14.42 m/s at 56.31°); a = 4i + 12j m/s² (12.65 m/s²)
Problem. A tower-crane trolley moves out along the jib at a steady 0.8 m/s while the hoist raises the hook at a steady 0.6 m/s. Find the speed and direction of the hook relative to the ground and its displacement after 10 s.
- Horizontal component ẋ = 0.8 m/s; vertical component ẏ = 0.6 m/s.
- Speed = √(0.8² + 0.6²) = 1.0 m/s, at tan⁻¹(0.6/0.8) = 36.87° above the horizontal.
- Both components are constant, so the acceleration is zero and the path is a straight line.
- After 10 s: x = 8 m, y = 6 m, displacement = 10 m along the same 36.87° line.
Answer. 1.0 m/s at 36.87° above horizontal; displacement 10 m
Problem. A pin slides along a slot whose shape is y = x²/20 (metres). The pin's horizontal motion is x = 5t. Find its velocity and acceleration when t = 2 s.
- At t = 2 s: x = 10 m, y = 100/20 = 5 m. ẋ = 5 m/s, ẍ = 0.
- f′(x) = x/10 = 1 and f″ = 1/10 at x = 10 m.
- ẏ = f′ ẋ = 1 × 5 = 5 m/s, so v = 5 i + 5 j m/s, speed 7.071 m/s at 45°.
- ÿ = f″ ẋ² + f′ ẍ = 0.1 × 25 + 0 = 2.5 m/s², so a = 2.5 j m/s².
Answer. v = 5i + 5j m/s (7.07 m/s at 45°); a = 2.5j m/s²
Step-by-step procedure
- Fix the origin and axes and write the components x(t), y(t) (and z(t)).
- Differentiate each component once for the velocity and twice for the acceleration.
- Combine components into magnitudes with Pythagoras and directions with tan⁻¹.
- If only the path y = f(x) and one component are known, use ẏ = f′ ẋ and ÿ = f″ ẋ² + f′ ẍ.
- Check that the velocity is tangent to the path at the point found.
Site notes
- Crane operators combine slewing, trolleying and hoisting; the hook speed is the vector sum of the components, so a load can move faster than any single motion suggests.
- Survey drones log their position as east, north and height components; their ground speed and climb rate come from differentiating each component of the logged track.
- In a curved slot or guide, the guide must supply the acceleration across the path; that is why curved guides wear on their outer face.
- Adding the magnitudes of the components instead of combining them as vectors.
- Assuming the acceleration is tangent to the path, like the velocity.
- Forgetting the f′ ẍ term when the motion along x is not uniform.
- Taking the direction of the velocity as tan⁻¹(y/x), which is the direction of the position vector, not of the motion.
Velocity is always tangent to the path; the acceleration leans towards the inside of the curve whenever the path bends.
Summary
- r = x i + y j + z k with fixed unit vectors.
- Differentiate each component: v = ẋ i + ẏ j + ż k, a = ẍ i + ÿ j + z̈ k.
- Each direction can be treated as separate rectilinear motion.
- On a known path y = f(x): ẏ = f′ ẋ, ÿ = f″ ẋ² + f′ ẍ.
Practice questions
Tap a question to see the answer.
1A particle has x = 3t and y = 4t (m, s). Find its speed.
√(3² + 4²) = 5 m/s, constant, in a straight line.
2A particle moves with x = 3 cos 2t and y = 3 sin 2t (m, s). Find its speed and the magnitude of its acceleration.
v = 6 m/s (constant); a = 12 m/s², directed towards the origin.
3For x = t² and y = 2t (m, s), find the speed and acceleration at t = 1 s.
v = 2i + 2j m/s, 2.828 m/s; a = 2i m/s², 2 m/s².
4A drone starts at the origin with ẋ = 3 m/s (constant) and ẏ = 2t m/s. Find its distance from the start after 4 s.
x = 12 m, y = t² = 16 m; distance = 20 m.
5A velocity has components 6 m/s and −8 m/s. Find the speed and direction.
10 m/s at 53.13° below the positive x-axis.
6Why is the velocity always tangent to the path?
Over a very short time the displacement dr is a tiny chord of the path, which becomes the tangent as dt → 0.
References
Standard texts, listed in no order of merit. Our explanations, examples and diagrams are original; nothing is copied from these books.
- F. P. Beer, E. R. Johnston, D. F. Mazurek, P. J. Cornwell, B. P. Self, Vector Mechanics for Engineers: Statics and Dynamics, McGraw Hill, 12th edition, 2019.
- R. C. Hibbeler, Engineering Mechanics: Statics, Pearson, 15th edition, 2022 (published 2021).
- J. L. Meriam, L. G. Kraige, J. N. Bolton, Engineering Mechanics: Statics, Wiley, 9th edition, 2018.
- S. Timoshenko, D. H. Young, J. V. Rao, S. Pati, Engineering Mechanics (in SI units), McGraw Hill Education (India), 5th edition, 2013.